Step 1: Firstly, if your android phone isn't rooted, try to root it, and also make sure that such android phone have a Broadcom bcm4329 or bcm 4330 chipest unlike the Nexus 7, Galaxy S1/S2, Nuxus 1, Htc Desire HD, etc. The presence of Cyanogen ROM on your device can be of use to make the bcmon app work through.
Step 2: Then download and install bcmon, it's essential because it helps monitor mode on your broadcom chipest that helps in the PIN Cracking.
Step 3: After installation, run the app and tap "monitor mode" option.
Step 4: Then tap the "Run bcmon terminal" option and type "airodump-ng" and Enter. Once the airodump loads finish, you would be directed to the prompt command in which you're to type "airodump-ng wlan0" then tap the Enter button.
Step 5: In this stage, a Mac address would appear, in which you're to jot down. Step 6: Start scanning the channel by collecting information from the access point before attempting to crack the password, then type, "airodump-ng -cchannel#--bssidMAC address-w output ath0" and tap enter, then it would start scanning, try scanning till it reaches 20,000 - 30,000 packets.
Step 7: To finally crack the password, return to the terminal, but make sure you've reached the suitable number of packets, then type "aircrack- ng output*.cap" and tap enter at the terminal.
Step 8: Once the password is cracked successfully, you would recieve a message alerting, 'Key Found' and would display the key in hexidecimal form. So when entering the key, make sure you eliminate the dots '.' or double dots ':', i.e if it displays 12:34:56:78:90, then enter 1234567890 as the code. Disclaimer: Please I won't be held responsible for any illegal activity this tips is used for, it's just for knowledge sake.
Step 2: Then download and install bcmon, it's essential because it helps monitor mode on your broadcom chipest that helps in the PIN Cracking.
Step 3: After installation, run the app and tap "monitor mode" option.
Step 4: Then tap the "Run bcmon terminal" option and type "airodump-ng" and Enter. Once the airodump loads finish, you would be directed to the prompt command in which you're to type "airodump-ng wlan0" then tap the Enter button.
Step 5: In this stage, a Mac address would appear, in which you're to jot down. Step 6: Start scanning the channel by collecting information from the access point before attempting to crack the password, then type, "airodump-ng -cchannel#--bssidMAC address-w output ath0" and tap enter, then it would start scanning, try scanning till it reaches 20,000 - 30,000 packets.
Step 7: To finally crack the password, return to the terminal, but make sure you've reached the suitable number of packets, then type "aircrack- ng output*.cap" and tap enter at the terminal.
Step 8: Once the password is cracked successfully, you would recieve a message alerting, 'Key Found' and would display the key in hexidecimal form. So when entering the key, make sure you eliminate the dots '.' or double dots ':', i.e if it displays 12:34:56:78:90, then enter 1234567890 as the code. Disclaimer: Please I won't be held responsible for any illegal activity this tips is used for, it's just for knowledge sake.
